|
COAL CRACKER 92" WHEEL BASE OFF-ROAD DUNE BUGGY    Click on any picture above for dimensions.
COAL CRACKER 2 Seat Off-Road Chassis - Square Roof - 92" Wheel Base
All Kits come with the following :
- Metal of your choice already cut, bent, and notched.
- Flanges & Hardware for mounting of Rear Cage
- Under Bar Mounting already welded together
- Seat Back Brace
- 8 Front End Clamps
- Shift Box with Shift Rod Support - Beetle Trans ( For Bus trans add $20) Brace Kits Available for Coal Cracker
*All prices are without your torsion installed. If you need a torsion installed it is a $75 charge for installation. - Core Charges may vary depending what you need.
*Shipping charges are estimated for delivery to a business or terminal for pick up.
- Residential Deliveries add $80.00
*Please know if you are using a Ball Joint or Link Pin Front Suspension.
   Click on any picture above for dimensions.
*1st View Shown w/o Diagonal Bars for better view results. These are included in your kit.
Brace Kit Available for Coal Cracker Those building for off-road use should use the brace kits provided below for added strength. Along with the brace kits they should also go with the Mild Steel 1 1/2" .120 wall tubing to add life to the frame by reducing stress.    Click on Pictures above for better view of each brace kit available. Pricing for Brace Kits Installed Front Brace Kit - $79.95 Roof Brace Kit - $49.95 Back Brace Kit - $59.95 Frame Horn & Torsion Supports - $49.95 Save when you add your brace kits when ordering. When ordering all brace kits with your frame you will only spend $200.00 for all 4 brace kits when installed on a fully tacked or fully welded frame. Please understand if you order a Basic Kit or Half tacked kit we can not install these on your frame. We do offer all our brace kits to these kits also however they may require you to modify slightly depending on the way you welded your frame together. They are notched and cut to length of our jigged frames. If you are installing these on a Basic or Half Tacked Kit please subtract $15.00 off each kit you desire. Don't Forget you'll Still Need / May Want the Following to go along with your Kit : Shift Box Bushing
Shift Rod & Coupler
Steering Shaft & Steering Bearing
Seat Straps
Tabs - Floor
- Seat Belt
- Lights
HD Pedal Box
Throttle Cable Conduit
Clutch Cable Conduit
Brake Flex Hose Brackets
Foot Rest
Floor - Aluminum / Steel
Grab Bar
Brace Kit
Rear Shock Mounts
Front Bumper
Tree Bars
ALL ACTIVITIES ARE AT THE USERS' OWN RISK. The VW Store products are built tough, but some impact or use may exceed the products capability to protect against injury or damage. These products are not a substitute for safe, sensible driving. NO WARRANTY OR GUARANTEE IS IMPLIED OR INTENDED AND NO RESPONSIBILITY IS ASSUMED BY 'THE VW STORE' FOR DAMAGE OR INJURY SUSTAINED FROM THE USE OF THESE PRODUCTS. When building your dune buggy, obtain assistance from a qualified, licensed builder. Also have all welding performed by a certified, licensed welder. Be certain there is nothing located so that it might injure the driver or passengers; be sure to allow for occupants to be out of position as they might be in an accident. Pad all possible places where contact might be made by the driver or passengers. The most carefully designed vehicle possible could not be safe, unless it is properly constructed, maintained and operated. Always wear a helmet and eye protection. Always wear a professionally installed 5 Point harness. Never use the vehicle in an unsafe or illegal manner. The VW Store chassis are designed for pleasure riding. They are not designed for racing or jumping. 'The VW Store' does not encourage, promote or recommend racing, jumping, or any type of hard, fast, or trick riding. 'The VW Store' makes no claims to the safety of these chassis for any purpose. |