Join our mailing list!
You are here: Home > Engine Parts
Choose a sub category:
Flywheels & Components Engine Tin
Engine Blocks Ignition System
Alternator Oil System Components
Hardware & Gaskets Crankshafts
Cam Followers / Lifters Camshafts
Connecting Rods Crankshaft Pulleys
Clutch Components Valve Cover
Fuel Pumps Rockers & Hardware
Piston & Cylinder Sets Carbs
Air Cleaners & Supplies Cylinder Heads
Sort By:
Page of 21  
69mm Direct Drilled Crankshaft
Our Price: $139.00

In Cross-drilled crankshafts the pressure is divided in two directions, creating a zone of turbulence causing effects similar to oil foaming that reduces constant lubrications.  DIRECT DRILLED crankshafts force the oil in one direction for better full flow lubrication.  Cranks are New STD/STD with stock 69mm stroke.
Flywheel Seal / Main Seal
Our Price: $2.99

High Quality Silicone Flywheel Seal provides outstanding sesaling qualities in the most severe conditions.  Resistant to failure due to extreme temperatures.
Laser Pulley - Stock Diameter - Stock Installation - Black Anodized
Our Price: $39.00

The ultimate aluminum degree Pulley.  Hard anodized black for maximum durability plus Laser Engraved degree numbers & marks.  Standard sized pulley.  Stock Installation.
Laser Pulley - Stock Diameter - Machine-In Installation - Black Anodized
Our Price: $46.99

The ultimate aluminum degree Pulley.  Hard anodized black for maximum durability plus Laser Engraved degree numbers & marks.  Standard sized pulley.  Machine-In Installation.  Comes with Sand Seal.
Laser Pulley - Stock Diameter - Bolt-In Installation - Black Anodized
Our Price: $52.99

The ultimate aluminum degree Pulley.  Hard anodized black for maximum durability plus Laser Engraved degree numbers & marks.  Standard sized pulley.  Bolt-In Installation.  Comes with Sand Seal.
Complete Stock Single Port Head

Product price is not filled in. This product cannot be purchased.

Our Price:

All new not rebuilt.  Available bare or complete w/ quality components.  Heads come with the standard 35.5 intake & 32mm exhaust valve seats.  All seats are cut to the proper angle.
Complete Stock Dual Port Cylinder Head
Our Price: $229.00

All new not rebuilt.  Available bare or complete w/ quality components.  Heads come with the standard 35.5 intake & 32mm exhaust valve seats.  All seats are cut to the proper angle.
Cam Plug - Rubber for case w/o Groove
Our Price: $2.99

Always use a new Cam Plug to ensure a leak-free seal.
Cam Plug - Metal for case w/ Groove
Our Price: $2.99

Always use a new Cam Plug to ensure a leak-free seal.
H.D. Oil Pump w/ Flat Cam Gear – 26mm Gears – 1500-1600cc Thru 70
Our Price: $34.95

For stock & moderate hi-performance engines.  Oil volume is increased by 25% (40% w/ the H.P. Pump)  Made from cast Aluminum & machined to exacting tolerances.  Pumps are supplied without cover.  All Pumps are for 8mm studs.
H.P. Oil Pump w/ Flat Cam Gear – 30mm Gears 1500-1600cc Thru 70
Our Price: $39.95

For stock & moderate hi-performance engines.  Oil volume is increased by 25% (40% w/ the H.P. Pump)  Made from cast Aluminum & machined to exacting tolerances.  Pumps are supplied without cover.  All Pumps are for 8mm studs.
H.D. Oil Pump w/ Dish Cam Gear – 30mm Gears – 1600cc from 71
Our Price: $36.95

For stock & moderate hi-performance engines.  Oil volume is increased by 25% (40% w/ the H.P. Pump)  Made from cast Aluminum & machined to exacting tolerances.  Pumps are supplied without cover.  All Pumps are for 8mm studs.
Stock Camshaft w/ Flat Gear – 1300-1600 – 66-70
Our Price: $64.95

Brand new stock replacement camshaft is available in both Early Flat Gear & Late Dished Gear Designs.  Remember new cam follows must be used with a new cam.
Stock Camshaft w/ Dished Gear – 1600 – 71-79
Our Price: $74.95

Brand new stock replacement camshaft is available in both Early Flat Gear & Late Dished Gear Designs.  Remember new cam follows must be used with a new cam.
Exhaust Valve – Stock 32mm – 1500-1600cc – Each
Our Price: $7.99

Manufactured to exacting specifications.  Sold individually.
Intake Valve – Stock – 35.5mm – 1500cc-1600cc – Each
Our Price: $3.99

Manufactured to exacting specifications.  Sold individually.
Billet Crankshaft Pulley Bolt
Our Price: $6.99

Have you gone totally Billet?  Not if you don't have a silver zinc plated Billet Steel Pulley Bolt.  Fits stock & Aluminum pulleys.  Has a 3/8” drive broach for slip-free tightening & loosening.
Stock Style Pulley Bolt w/ Broach
Our Price: $6.99

This broached pulley bolts make it a snap by allowing you to insert a 3/8” drive ratchet for extension bar directly into the bolt.  Works great when building engines too.   Includes silver zinc plated bolt & washer.
Stainless Steel Valve Covers w/ Bales – Pair
Our Price: $26.99

Cast & polished Aluminum with cool fins to increase heat dissipation from the upper head area.  Includes chrome bales or clips & cork / rubber gaskets.
Chrome Bales for Stainless Steel Valve Covers – Pair
Our Price: $5.49

Chrome Bales for Stainless Steel Valve Covers – Pair
For Bales only.
H.D. Swivel Head Valve Adjusters – Set of 8
Our Price: $24.99

EMPI Heavy Duty Performance Swivel Feet Adjusters feature a large foot print that covers the valve stem to reduce the chance of mushrooming & side load friction.  Contact areas are precision ground & hardened.  Features slotted screw head design.  Kit is complete with rocker boss shims to insure correct rocker arm geometry.
1.25 Ratio Rocker Arms w/ Bushings Set
Our Price: $139.00

Superior quality chromoly rockers are just the answer for either a mild street or a hi-performance competition engine.  Are made from forged chromoly & precision ground & heat treated.  Not only are these the strongest rocker arms available they are also drilled through on the alloy adjusting screws so both screws & rocker arms are fully lubricated.  All shafts, blocks & shims are high strength alloy as well.  Precision ground bronze bushings with through hole lubrication ensures that premature failure of the old needle bearing rocker arm design is a thing of the past.  Chromoly rocker arm studs are provided to complete this kit & make installation & use a trouble free experience.
1.40 Ratio Rocker Arms w/ Bushings Set
Our Price: $139.00

Superior quality chromoly rockers are just the answer for either a mild street or a hi-performance competition engine.  Are made from forged chromoly & precision ground & heat treated.  Not only are these the strongest rocker arms available they are also drilled through on the alloy adjusting screws so both screws & rocker arms are fully lubricated.  All shafts, blocks & shims are high strength alloy as well.  Precision ground bronze bushings with through hole lubrication ensures that premature failure of the old needle bearing rocker arm design is a thing of the past.  Chromoly rocker arm studs are provided to complete this kit & make installation & use a trouble free experience.
Valve Adjustment Screw Only – Each
Our Price: $4.99

Valve Adjustment Screw Only – Each
Hi-Performance Rocker Shaft Kit w/ Floating Center Spacer
Our Price: $39.00

Increase the RPM potential of your engine & get more power.  Rocker shaft kits help to eliminate rocker shaft side play that causes rocker arm galling, clip & washer failure.  Includes necessary hardware.