Join our mailing list!







You are here: Home > Engine Parts > Carbs > MANIFOLDS / INTAKES
Sort By:
Page of 1
EMPI BUGPACK B156212 - CARB SOFT MOUNT ISOLATORS - FITS 40/44 IDF WEBER & EMPI HPMX - PAIR - BLACK
Our Price: $6.95

THESE INNOVATIVE ISOLATOR MOUNTS FIT BETWEEN THE INTAKE MANIFOLD & CARB TO DAMPEN FUEL VIBRATIONS IN EMPI & WEBER FLOAT BOWLS. BY ABSORBING THE SHOCK YOU WILL REDUCE FUEL FOAMING, CUT DOWN ON ERRATIC NEEDLE & SEAT MOTION, STABILIZE THE FUEL CURVE. MADE FROM SPECIALLY FORMULATED POLYURETHANE.
EMPI BUGPACK B156214 - CARB SOFT MOUNT ISOLATORS - FITS 48 IDA - 48 IDF WEBER & EMPI EPC 48'S - PAIR - BLACK
Our Price: $6.95

THESE INNOVATIVE ISOLATOR MOUNTS FIT BETWEEN THE INTAKE MANIFOLD & CARB TO DAMPEN FUEL VIBRATIONS IN EMPI & WEBER FLOAT BOWLS. BY ABSORBING THE SHOCK YOU WILL REDUCE FUEL FOAMING, CUT DOWN ON ERRATIC NEEDLE & SEAT MOTION, STABILIZE THE FUEL CURVE. MADE FROM SPECIALLY FORMULATED POLYURETHANE.
EMPI 3260 - STAGE 1 INTAKE GASKETS - PAIR - EMPI CNC MATCH-PORTED GASKETS
Our Price: $7.95

REPLACEMENT INTAKE GASKETS FOR EMPI MATCH PORTED CYLINDER HEADS / MANIFOLDS
EMPI 43-5216 - DUAL 34 EPC / ICT TALL MANIFOLD KIT - T1 1300-1600CC DUAL PORT ENGINE
Our Price: $119.95

EMPI 47-7334 - DEEP OFF-SET MANIFOLD KIT WITH HARDWARE & GASKETS
Our Price: $129.95

KIT INCLUDES : INTAKE MANIFOLDS, CARB TO MANIFOLD GASKETS, INTAKE GASKETS, STUDS, NUTS, AND WASHERS.
EVERYTHING YOU NEED TO TO BOLT THE CARB TO THE INTAKE. ALSO THE INTAKE TO THE HEAD.
EMPI 43-5214 - 48/51 EPC / IDA TALL MANIFOLDS - RACING STYLE WITH ADDITIONAL MATERIAL FOR PORTING - PAIR
Our Price: $139.95

EMPI 47-0631 - 48/51 EPC & IDA - SHORT INTAKE MANIFOLDS - PAIR
Our Price: $149.95

ALLOWS FOR 48/51 EPC / IDA CARBS IN A SEDAN WITH NO OR MINIMAL CUTTING OF YOUR CAR, ENGINE LID OR VELOCITY STACKS. MAY NOT FIT WITH ALL STOCK DOGHOUSE FAN SHROUDS. LEFT & RIGHT FIT THE SAME MANIFOLD
EMPI 43-1025 - GTV-2 STAGE 1 MATCH PORTED OFF-SET MANIFOLD KIT FOR HPMX / IDF / DELLORTO CARBURETORS - PAIR
Our Price: $239.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1026 - GTV-2 STAGE 2 MATCH PORTED OFF-SET MANIFOLD KIT FOR HPMX / IDF / DELLORTO CARBURETORS - PAIR
Our Price: $239.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1027 - GTV-2 STAGE 3 MATCH PORTED OFF-SET MANIFOLD KIT FOR HPMX / IDF / DELLORTO CARBURETORS - PAIR
Our Price: $239.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1028 - GTV-2 STAGE 1 MATCH PORTED SHORT MANIFOLD KIT FOR 48/51 EPC / IDA CARBURETORS - PAIR
Our Price: $249.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1029 - GTV-2 STAGE 2 MATCH PORTED SHORT MANIFOLD KIT FOR 48/51 EPC / IDA CARBURETORS - PAIR
Our Price: $249.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1030 - GTV-2 STAGE 3 MATCH PORTED SHORT MANIFOLD KIT FOR 48/51 EPC / IDA CARBURETORS - PAIR
Our Price: $249.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1031 - GTV-2 STAGE 1 MATCH PORTED TALL MANIFOLD KIT FOR 48/51 EPC / IDA CARBURETORS - PAIR
Our Price: $249.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1032 - GTV-2 STAGE 2 MATCH PORTED TALL MANIFOLD KIT FOR 48/51 EPC / IDA CARBURETORS - PAIR
Our Price: $249.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1033 - GTV-2 STAGE 3 MATCH PORTED TALL MANIFOLD KIT FOR 48/51 EPC / IDA CARBURETORS - PAIR
Our Price: $249.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1034 - GTV-2 STAGE 1 MATCH PORTED TALL MANIFOLDS W/ NOS BOSS FOR HPMX / IDF / DELLORTO CARBURETORS - PAIR
Our Price: $264.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1035 - GTV-2 STAGE 2 MATCH PORTED TALL MANIFOLDS W/ NOS BOSS FOR HPMX / IDF / DELLORTO CARBURETORS - PAIR
Our Price: $264.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.
EMPI 43-1036 - GTV-2 STAGE 3 MATCH PORTED TALL MANIFOLDS W/ NOS BOSS FOR HPMX / IDF / DELLORTO CARBURETORS - PAIR
Our Price: $264.95

CNC MACHINED MANIFOLDS TO MATCH THE EMPI GTV-2 WEDGE-PORT HEADS.
ONE OF THE BENEFITS OF CNC PORTING IS THAT YOU CAN REPLACE YOUR MANIFOLDS AT ANY TIME AND STILL HAVE AN EXACT MATCH TO YOUR CYLINDER HEADS!
PORT-MATCHED FOR STAGE 1, 2, &3 CYLINDER HEADS IN A VARIETY OF APPLICATIONS.
SETS ARE COMPLETE WITH ALL HARDWARE & GASKETS.