Join our mailing list!







You are here: Home > Engine Parts > Oil System Components > Push Rods, Tubes, & Seals
Sort By:
Page of 2
Replacement O-Ring Set of 8 for Adjustable Push Rod Tubes
Our Price: $2.95

Change damaged or leaking push rod tubes in minutes without removing the engine or heads.  Great for emergency repairs or permanent installation.  The center o-ring seal stops oil leaks.  Made from heavy duty Aluminum for strength & anodized for good looks.  Fits 1200-1600cc.
Replacement O-Ring Set for Aluminum Push Rod Tubes
Our Price: $3.95

Replacement O-Ring set for E 4108/E 4109 Hi-Perf. Aluminum Push Rod Tubes
Stock Push Rod Tube Seal Kit 16 pcs.
Our Price: $5.95

Stock replacement Push Rod Tube seals.  Pack of 16 seals.
Stainless Push Rod Tube w/o Seals Each
Our Price: $6.25

No rust or corrosion with EMPI's stainless steel Push Rod Tubes.  The ultimate in strength & good looks.  Fits 1300-1600cc
Stainless Windage Push Rod Tubes w/o Seals Each
Our Price: $7.50

These Push Rod Tubes extend further into the case to prevent oil from over filling the valve covers during cornering & hard race use.  Made from stainless steel to resist corrosion.  Fits 1300-1600cc.
Silicone Push Rod Tube Seal Kit 16 pcs.
Our Price: $9.95

High Temp. Silicone Push Rod Tube seals will hold up to hight heat without drying & cracking.  Each kit contains 16 seals.  Enough for 1 complete engine.
Aluminum Quick Change Push Rod Tubes w/ Seals Each
Our Price: $10.95

Change damaged or leaking push rod tubes in minutes without removing the engine or heads.  Great for emergency repairs or permanent installation.  The center o-ring seal stops oil leaks.  Made from heavy duty Aluminum for strength & anodized for good looks.  Fits 1200-1600cc.
EMPI 16-9600 - PUSH ROD MEASURING TOOL - EACH
Our Price: $14.95

ADJUST OUT, LOCK DOWN, MEASURE, AND CUT PUSH RODS.
Nylon Push Rod Tube w/o Seals Set of 8
Our Price: $19.99

The heat resistant high impact design nylon is an economical alternative to the Aluminum self-adjusting push rod tube & offers the same benefits.  Available in black.  Fits 1200-1600cc.
Heavy Duty Stock Style Push Rod Tubes X8
Our Price: $24.95

Made out of thicker steel than stock push rod tubes.  Ideal for rough service & use.  Fits 1300-1600cc.
Nylon Push Rod Tube w/ Seals Set of 8
Our Price: $27.95

The heat resistant high impact design nylon is an economical alternative to the Aluminum self-adjusting push rod tube & offers the same benefits.  Available in black.  Fits 1200-1600cc.
Heavy Duty Oil Pump 1300-1500 thru 70 8mm Studs w/ Flat Cam Gear
Our Price: $38.95

The gears on the EMPI H.D. Oil Pumps are 38% larger than stock pumps providing increased oil pressure, oil flow, volume & lower oil temperature.  Made from cast iron & precision machined for a distrotion free fit.  The early style pump (P/N: E 31-2935) is compatible w/ stock & hi-performance cams w/ flat cam gears.
Hi-Performance Push Rods Set of 8
Our Price: $39.95

These push rods resist flexing at high RPM's under the loads of high lift cams & heavy valve spring pressures.  A must with any dual spring application.  Made from the highest quality heat-treated 5/16 steel tubing, ends are pre-installed & push rods are 11.078 overall length.  Fits 1300-1600cc
Cut to Length 11.600 Long 3/8 Chromoly Push Rods Set of 8
Our Price: $39.95

Chromoly push rods are lighter & stronger than regular steel push rods.  The 3/8 tubing offers maximum strength to maintain no flex operation at higher RPM's under the stress of high lift cams & high-rev. Valve springs.  Available in stock length fully assembled or custom Cut-to Length style.
Stock Length 11.078 Long 3/8 Chromoly Push Rods Set of 8
Our Price: $39.95

Chromoly push rods are lighter & stronger than regular steel push rods.  The 3/8 tubing offers maximum strength to maintain no flex operation at higher RPM's under the stress of high lift cams & high-rev. Valve springs.  Available in stock length fully assembled or custom Cut-to Length style.
Stainless Push Rod Tube w/o Seals Set of 8
Our Price: $39.95

No rust or corrosion with EMPI's stainless steel Push Rod Tubes.  The ultimate in strength & good looks.  Fits 1300-1600cc
Stainless Windage Push Rod Tubes w/o Seals Set of 8
Our Price: $44.95

These Push Rod Tubes extend further into the case to prevent oil from over filling the valve covers during cornering & hard race use.  Made from stainless steel to resist corrosion.  Fits 1300-1600cc.
Adjustable Push Rod Tube w/o Seals Set of 8
Our Price: $54.95

Change damaged or leaking push rod tubes in minutes without removing the engine or heads.  Great for emergency repairs or permanent installation.  The center o-ring seal stops oil leaks.  Made from heavy duty Aluminum for strength & anodized for good looks.  Fits 1200-1600cc.
Aluminum Quick Change Push Rod Tubes w/ Seals Set of 8
Our Price: $57.95

Change damaged or leaking push rod tubes in minutes without removing the engine or heads.  Great for emergency repairs or permanent installation.  The center o-ring seal stops oil leaks.  Made from heavy duty Aluminum for strength & anodized for good looks.  Fits 1200-1600cc.
EMPI 4109 - Hi-Performance Aluminum Push Rod Tubes Set of 8
Our Price: $59.95

These Billet Aluminum machine finish push rod tubes have been designed to the specific requirements of hi-performance engine building. Features include 2 piece spring tension tubing that expands & contracts with engine, dual viton o-ring seals, plus have an inner tube diameter of 7/8 at the head end for maximum push rod clearance.

** FREE PRIORITY MAIL SHIPPING TO USA **
B405400 - ALUMINUM 3/8" DIAMETER PUSH RODS - UNCUT - SET OF 8
Our Price: $69.95

LIGHTWEIGHT STRONG 3/8" DIAMETER PUSH RODS FOR THE DISCERNING ENGINE BUILDER. THESE UNITS OFFER THE ULTIMATE IN STRENGTH VERSUS WEIGHT. AVAILABLE IN UNCUT LENGTHS, TO SUIT YOUR INDIVIDUAL APPLICATION. EASILY CUT & INSTALLED IN ANY VW ENGINE.
B405310 - 4130 CHROMOLY 3/8" PUSH RODS - 10.650 OAL - SET OF 8
Our Price: $69.95

MADE FROM 4130 CHROMOLY STEEL. BOTH PUSHROD TUBES & ENDS ARE DESIGNED TO WITHSTAND THE DEMANDS OF HIGH RPM & HEAVY SPRING LOADS. 3/8" DIAMETER RESISTS FLEX TO PREVENT DAMAGE TO OTHER VALVE-TRAIN COMPONENTS. WHEN BUYING PUSHRODS BE SURE IT'S CHROMOLY, NOT JUST STEEL. AVAILABLE IN VARIOUS LENGTHS.
B405313 - 4130 CHROMOLY 3/8" PUSH RODS - 10.800 OAL - SET OF 8
Our Price: $69.95

MADE FROM 4130 CHROMOLY STEEL. BOTH PUSHROD TUBES & ENDS ARE DESIGNED TO WITHSTAND THE DEMANDS OF HIGH RPM & HEAVY SPRING LOADS. 3/8" DIAMETER RESISTS FLEX TO PREVENT DAMAGE TO OTHER VALVE-TRAIN COMPONENTS. WHEN BUYING PUSHRODS BE SURE IT'S CHROMOLY, NOT JUST STEEL. AVAILABLE IN VARIOUS LENGTHS.
B405311 - 4130 CHROMOLY 3/8" PUSH RODS - 11.060 OAL - SET OF 8
Our Price: $69.95

MADE FROM 4130 CHROMOLY STEEL. BOTH PUSHROD TUBES & ENDS ARE DESIGNED TO WITHSTAND THE DEMANDS OF HIGH RPM & HEAVY SPRING LOADS. 3/8" DIAMETER RESISTS FLEX TO PREVENT DAMAGE TO OTHER VALVE-TRAIN COMPONENTS. WHEN BUYING PUSHRODS BE SURE IT'S CHROMOLY, NOT JUST STEEL. AVAILABLE IN VARIOUS LENGTHS.
B405312 - 4130 CHROMOLY 3/8" PUSH RODS - 11.350 OAL - SET OF 8
Our Price: $69.95

MADE FROM 4130 CHROMOLY STEEL. BOTH PUSHROD TUBES & ENDS ARE DESIGNED TO WITHSTAND THE DEMANDS OF HIGH RPM & HEAVY SPRING LOADS. 3/8" DIAMETER RESISTS FLEX TO PREVENT DAMAGE TO OTHER VALVE-TRAIN COMPONENTS. WHEN BUYING PUSHRODS BE SURE IT'S CHROMOLY, NOT JUST STEEL. AVAILABLE IN VARIOUS LENGTHS.