Join our mailing list!







You are here: Home > Engine Parts > Camshafts
Choose a sub category:
Cam Gears Cam Gear Bolts
Sort By:
Page of 2
Cam Gear Bolts Set of 3
Our Price: $3.99

High Grade bolts for attaching Aluminum Bolt-On Cam gear.
EMPI 21-4315 - LOW PROFILE 5/16" - 24 SAE GRADE 8 CAMSHAFT GEAR BOLTS
Our Price: $4.95

THESE LOW PROFILE 5/16" - 24 SAE GRADE 8 CAM BOLTS OFFER A REDUCED HEAD THICKNESS FOR EXTRA CLEARANCE WHEN INSTALLING A 3 BOLT CAM & GEAR WITH SOME HIGH PERFORMANCE OIL PUMPS.
EMPI 27-0160 - MOLY ASSEMBLY LUBE 1/4 OZ TUBE
Our Price: $6.95

APPLIED TO ALL BEARING SURFACES, CAM, AND CAM FOLLOWERS DURING ASSEMBLY THIS HIGH GRADE MOLY LUBE INSURES PROPER LUBRICATION UPON INITIAL ENGINE START UP AND BREAK IN.
Billet Cam Plug w/ O-Ring
Our Price: $9.99

A secure, leak free seal.  Cases must be machined for O-Ring groove.
Hi-Performance Aluminum Push Rod Tubes Each
Our Price: $10.99

These Billet Aluminum machine finish push rod tubes have been designed to the specific requirements of hi-perf. Engine building.  Features include 2 piece spring tensioned tubing that expands & contracts with engine, dual viton o-ring seals, plus have an inner tube diameter of 7/8 at the head end for maximum push rod clearance.
Bolt-On Cam Gear
Our Price: $24.95

EMPI's Bolt on Aluminum Cam gear is made from high quality Aluminum & precision machined for trouble free valve train perrformance.  Works with all aftermarket & O.E. Camshafts.  Requires cam gear bolts to attach gear to cam.
Cam Followers / Lifters Set of 8
Our Price: $34.95

NEVER INSTALL A NEW CAMSHAFT WITHOUT NEW CAM LIFTERS.  Get longer life from your engine with EMPI's Performance Cam Lifters.  Manufactured to stock tolerances.
Adjustable Cam Gear Kit
Our Price: $39.95

Allows you to easily dial in your cam timing with the offset washers.  The gear is precision machined for high quality Aluminum & the kit includes special washers & bolts.  Fits all 1200-1600cc T1/2/3
31mm Hi-Performance Cam Followers / Lifters Set of 8
Our Price: $48.00

EMPI's 31mm surface contact lifters have 15% more contact area than stock lifters to reduce scuffing & early lobe wear.  Made from one-piece billets & precision ground.  Sold in matching sets of 8
Billet 1 piece Lifters 28mm w/ Oil Hole Face Set of 8
Our Price: $48.00

Made from 1 piece chromoly billets & then precision ground & heat treated.  These are the lightest & strongest lifters available.  In addition this lifter is available with an oil hole in the face for extra lubrication for those high load, hi-performance applications.
Billet 1 piece Lifters 30mm Solid Face Set of 8
Our Price: $48.00

Made from 1 piece chromoly billets & then precision ground & heat treated.  These are the lightest & strongest lifters available.  In addition this lifter is available with an oil hole in the face for extra lubrication for those high load, hi-performance applications.  30Mm face allowing for full contact when using with high lift cam profiles.  These lifters can fill the needs of any racer!
Billet 1 piece Lifters 30mm w/ Oil Hole Face Set of 8
Our Price: $48.00

Made from 1 piece chromoly billets & then precision ground & heat treated.  These are the lightest & strongest lifters available.  In addition this lifter is available with an oil hole in the face for extra lubrication for those high load, hi-performance applications.  30Mm face allowing for full contact when using with high lift cam profiles.  These lifters can fill the needs of any racer!
113-109-021D - Stock Camshaft w/ Flat Gear 1300-1600 66-70
Our Price: $69.95

Brand new stock replacement camshaft is available in both Early Flat Gear & Late Dished Gear Designs.  Remember new cam follows must be used with a new cam.
113-109-021G - Stock Camshaft w/ Dished Gear 1600 71-79
Our Price: $69.95

Brand new stock replacement camshaft is available in both Early Flat Gear & Late Dished Gear Designs.  Remember new cam follows must be used with a new cam.
EMPI 22-4100 - EMPI W100 DESIGNED CAMSHAFT - FOR USE WITH 1.1 / 1.25 ROCKER ASSEMBLIES
Our Price: $69.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!
EMPI 22-4120 - EMPI W120 DESIGNED CAMSHAFT - FOR USE WITH 1.1 / 1.25 ROCKER ASSEMBLIES
Our Price: $69.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!
EMPI 22-4125 - EMPI W125 DESIGNED CAMSHAFT - FOR USE WITH 1.1 / 1.25 ROCKER ASSEMBLIES
Our Price: $69.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!
EMPI 22-4130 - EMPI W130 DESIGNED CAMSHAFT - FOR USE WITH 1.1 / 1.25 ROCKER ASSEMBLIES
Our Price: $69.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!
EMPI 22-4140 - EMPI W140 DESIGNED CAMSHAFT - FOR USE WITH 1.1 / 1.25 ROCKER ASSEMBLIES
Our Price: $69.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!
EMPI 22-4110 - EMPI W110 DESIGNED CAMSHAFT - FOR USE WITH 1.1 / 1.25 ROCKER ASSEMBLIES
Our Price: $69.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!
EMPI 22-4014 - EMPI VZ14 DESIGNED CAMSHAFT - FOR USE WITH 1.1 ROCKER ASSEMBLIES ONLY
Our Price: $69.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!
EMPI 22-4015 - EMPI VZ15 DESIGNED CAMSHAFT - FOR USE WITH 1.1 ROCKER ASSEMBLIES ONLY
Our Price: $69.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!
EMPI 22-4025 - EMPI VZ25 DESIGNED CAMSHAFT - FOR USE WITH 1.1 ROCKER ASSEMBLIES ONLY
Our Price: $69.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!
EMPI 22-4030 - EMPI VZ30 DESIGNED CAMSHAFT - FOR USE WITH 1.1 ROCKER ASSEMBLIES ONLY
Our Price: $74.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!
EMPI 22-4035 - EMPI VZ35 DESIGNED CAMSHAFT - FOR USE WITH 1.1 ROCKER ASSEMBLIES ONLY
Our Price: $74.95

STREET & RACE-PROVEN PROFILES DESIGNED & MANUFACTURED FOR MAXIMUM PERFORMANCE & RELIABILITY!
EACH ONE IS MADE WITH A SELECT CHILLED CAST IRON BILLET!
EACH CAM IS THEN MACHINED & GROUND COMPLETELY ON A CNC MACHINE!
DELIVERING EXACTING TOLERANCES & REPEAT-ABILITY!