Join our mailing list!







You are here: Home > Engine Parts > Clutch Components
Choose a sub category:
Throw Out Bearings Tools & Hardware
Pressure Plates Clutch Cable Arms
Clutch Cables Clutch Discs
CROSS SHAFTS & BUSHINGS
Sort By:
Page of 2
Throw Out Super Clips Thru 70 Each
Our Price: $3.95

H.D. Throw-Out Bearings should be installed whenever replacing your Pressure Plate & or Disc.  Super clips make sure everything stays in its place.
EMPI 5302-K - CLUTCH PILOT TOOL ONLY - FITS T1 (BUG ENGINES) EARLY T2 (BUS ENGINES)
Our Price: $4.95

CLUTCH PILOT TOOL ONLY - REQUIRED TO INSTALL CLUTCH!
EMPI 5759 - LIFTER RETAINING CLIPS - PAIR
Our Price: $4.95

Clutch Installation Kit
Our Price: $5.95

Grade 8 bolts, wavy washers & a clutch pilot tool complete any VW Clutch installation.
EMPI 17-2817 - HEIM END 3/8" - 24 THREADS - 3/8" BALL - FOR EMPI CLUTCH SLAVE - EACH
Our Price: $8.95

IT IS IMPERATIVE THAT THE CLUTCH SLAVE BE MOUNTED IN A LEVEL POSITION!
BRACKETS & HEIM ENDS MAKE IT EASIER TO MOUNT WITH SMOOTHER ACTION!

BRACKETS AVAILABLE.
EMPI 5003 - UNIVERSAL FLYWHEEL LOCK 6 VOLT / 12 VOLT
Our Price: $9.95

CAN BE USED ON 6 OR 12 VOLT FLYWHEELS.
GLAND / AXLE NUT SOCKETS, 46MM, 3/4 DRIVE - EMPI 5770
Our Price: $9.95

REMOVE GLAND NUTS OR AXLE NUTS WITH THIS SOCKET AND BREAKER BAR!

THIS ITEM CAN BE USED ON AN AIR GUN HOWEVER ALWAYS USE A 4 FT BREAKER BAR WHEN FINISHING OFF TO ENSURE PROPER TORQUE.  AIR GUN WILL NOT PROVIDE ENOUGH TORQUE!

YOU SHOULD ALSO USE RED LOC-TITE ON EITHER AXLE NUT OR GLAND NUT TO ENSURE TORQUE.
Cross Shaft Bushing Kit 61-72
Our Price: $10.95

Re-bush your cross shaft housing for smooth action & trouble free operation.
EMPI 5748 - 36MM AXLE NUT / GLAND NUT TOOL
Our Price: $12.95

REMOVE REAR AXLE NUTS OR GLAND NUTS WITH THIS TOOL & YOUR 1/2" BREAKER BAR OR SLUDGE.

ITEM ALSO KNOWN AS AXLE NUT WACK TOOL!  FOR T1 NOT T2.  T2 IS 46MM!
Clutch Cable Arm T1 61-71 & all 002 T2 Transmission Each
Our Price: $12.99

Forged Heavy Duty Clutch Cable Arms.
Clutch Cable Arm T1 76-79 & all 091 T2 Transmission Each
Our Price: $12.99

Forged Heavy Duty Clutch Cable Arms.
Stock Style Cross Shaft T2 71-75
Our Price: $14.99

EMPI'S HD cross shafts are welded at critical points for performance & stock applications.
EMPI 98-1411 - Stock Style Cross Shaft BUS T2 1968-70
Our Price: $16.95

EMPI'S HD cross shafts are welded at critical points for performance & stock applications.
EMPI 18-1045 - 16MM BRONZE BUSHING CROSS SHAFT KIT
Our Price: $16.95

EMPI 18-1053 - 20MM BRONZE BUSHING CROSS SHAFT KIT
Our Price: $16.95

H.D. Cross Shaft T1 & T3 61-70 Type 2 Thru 67
Our Price: $16.99

EMPI'S HD cross shafts are welded at critical points for performance & stock applications.
H. D, CROSS SHAFT, TYPE 1 & 3, 61-70, TYPE 2, THRU 67
Our Price: $17.95

EMPI'S CROSS SHAFTS ARE WELDED AT CRITICAL POINTS FOR PERFORMANCE AND STOCK APPLICATIONS.
H.D. Cross Shaft T1 & T3 71-10/72
Our Price: $17.99

EMPI'S HD cross shafts are welded at critical points for performance & stock applications.
H.D. Thow Out Bearing Thru 70
Our Price: $18.95

H.D. Throw-Out Bearings should be installed whenever replacing your Pressure Plate & or Disc.  Super clips make sure everything stays in its place.
H.D. Throw Out Bearing 71 On
Our Price: $18.95

H.D. Throw-Out Bearings should be installed whenever replacing your Pressure Plate & or Disc.  Super clips make sure everything stays in its place.
EMPI 5004 - CRANKSHAFT & FLYWHEEL DRILL FIXTURE TOOL
Our Price: $23.95

EMPI 18-1041 - RACING CROSS SHAFT - T1 & T3 1961-1970; T2 THRU 67
Our Price: $24.95

ALL NEW RACING CROSS SHAFTS ARE QUALITY MANUFACTURED FOR DIRECT REPLACEMENT OF WORN, BROKEN, OR POOR QUALITY SHAFTS THAT JUST DON'T MEET THE DEMANDING REQUIREMENTS OF THE CLUTCH APPLICATIONS OF TODAY!
16MM BRONZE BUSHING KIT IS ALSO AVAILABLE.
EMPI 18-1042 - RACING CROSS SHAFT - T1 & T3 1970-10/72
Our Price: $24.95

ALL NEW RACING CROSS SHAFTS ARE QUALITY MANUFACTURED FOR DIRECT REPLACEMENT OF WORN, BROKEN, OR POOR QUALITY SHAFTS THAT JUST DON'T MEET THE DEMANDING REQUIREMENTS OF THE CLUTCH APPLICATIONS OF TODAY!
16MM BRONZE BUSHING KIT IS ALSO AVAILABLE.
EMPI 18-1043 - RACING CROSS SHAFT - T2 1968-1970
Our Price: $24.95

ALL NEW RACING CROSS SHAFTS ARE QUALITY MANUFACTURED FOR DIRECT REPLACEMENT OF WORN, BROKEN, OR POOR QUALITY SHAFTS THAT JUST DON'T MEET THE DEMANDING REQUIREMENTS OF THE CLUTCH APPLICATIONS OF TODAY!
16MM BRONZE BUSHING KIT IS ALSO AVAILABLE.
EMPI 18-1044 - RACE CROSS SHAFT - T2 - 1971-1975
Our Price: $24.95

ALL NEW RACING CROSS SHAFTS ARE QUALITY MANUFACTURED FOR DIRECT REPLACEMENT OF WORN, BROKEN, OR POOR QUALITY SHAFTS THAT JUST DON'T MEET THE DEMANDING REQUIREMENTS OF THE CLUTCH APPLICATIONS OF TODAY!
16MM BRONZE BUSHING KIT IS ALSO AVAILABLE.