Join our mailing list!







THE JACKLE
2 Seat Off-Road Dune Buggy - Round Roof - 98" Wheel Base





JACKLE - FULL BRACE KIT


BRACE KITS ARE AVAILABLE SCROLL TO THE BOTTOM FOR MORE INFORMATION!

THE JACKLE
DESIGNED FOR : ROCKS, WOODS, SAND! EVERY DAY FUN!
2 Seat Off-Road Chassis - Round Roof - 98" Wheel Base
THE JACKLE is a frame we have designed for the everyday rider in mind
from a building & using experience.
We have been building, selling, and driving buggies for 30 years. We took all our knowledge about making buggies easy to ship, easy to build, better handling & comfort in mind!

The Jackle has a 4 point design in the floor & arm rail.
Which allow for more cockpit space without making your buggy to wide for trails.
With the wider cockpit now dual cutting brakes fit between the seats.
Wider cockpit at the windshield insures you are not looking at the
frame bars when driving like all other buggies.
When we moved the windshield forward it makes a more usable cockpit space that allows for
a small tool box, cooler, battery behind the seat, etc.
Allowed the front seats to be moved forward allowing also for more front end weight to
allow your front suspension to work properly.
More front end weight for braking, cutting, wheel stability and much more!

The Jackle is only currently available fully tacked or fully welded!
Due to the complexity of the frame design we have not yet to figure a perfect solution
for making it easy to ship to the customer that does not have the jig to build this frame.
By providing them fully welded we are insuring you the customer can be provided
the best quality of what we can offer in this frame!


This 2 seat frame offers a stylish spacious cockpit space. Enough for 2 people and all your off-road needs. Designed to be able to use with poly seats or the Race Trim Suspension seats as this frame has a 4" Raised Roof that comes standard! Remember all our frames fit Wider Seats standard.
If you need a taller roof let us know and we can raise it to whatever height you would like! Please note additional roof heights on this frame is an additional cost.

When purchasing this frame for the off-road we HIGHLY suggest getting the full brace kit
that has been custom built for the roof design of this frame!
For you street guys it also makes this frame look like your on the prowl driving down the road!

JACKLE FULLY TACKED - $799
JACKLE FULLY WELDED - $899


2 Seat Jackle Brace Kits

Those building for off-road use should use the brace kits provided below for added strength.
There is alot involved in the Jackle's brace kit as you can see below. I will go into full detail about the brace kit option below the photo's.









Pricing for Brace Kits Installed
Front Brace Kit
- $79.95
Roof Brace Kit - $74.95
Back Brace Kit - $84.95
Frame Horn & Torsion Supports - $49.95


Save $40 when you add your brace kits when ordering! When ordering all brace kits with your frame you will only spend $249.95 for all 4 brace kits when installed on a fully tacked or fully welded frame!

FRONT BRACE KIT INCLUDES :
1 1/2" .095 wall tubing. This is a 6 piece set!
Will attach to your windshield bar & tie rod bar increasing the strength
if you hit a tree with the front end!

ROOF BRACE KIT
1 1/2" .120 wall tubing. This is a 7 piece set!
This will increase the width of the roof over the cockpit.
This kit is designed to help deflect trees & brush while plowing through the trails!

BACK BRACE KIT
1 1/2" .120 wall tubing for the secondary rear hoop.
1 1/2" .095 wall tubing. This is a 5 piece set!
For the rear firewall x, and shock tower mounts that go between the 2 rear hoops!

FRAME HORN & TORSION SUPPORTS
1 1/2" .095 wall tubing. This is a 4 piece set!
This kit helps bring added support to the frame horns while the
engine & trans is bouncing around in the rear
cage!



ALL ACTIVITIES ARE AT THE USERS' OWN RISK.

The VW Store products are built tough, but some impact or use may exceed the products capability to protect against injury or damage. These products are not a substitute for safe, sensible driving.

NO WARRANTY OR GUARANTEE IS IMPLIED OR INTENDED AND NO RESPONSIBILITY IS ASSUMED BY 'THE VW STORE' FOR DAMAGE OR INJURY SUSTAINED FROM THE USE OF THESE PRODUCTS.

When building your dune buggy, obtain assistance from a qualified, licensed builder. Also have all welding performed by a certified, licensed welder. Be certain there is nothing located so that it might injure the driver or passengers; be sure to allow for occupants to be out of position as they might be in an accident. Pad all possible places where contact might be made by the driver or passengers.

The most carefully designed vehicle possible could not be safe, unless it is properly constructed, maintained and operated. Always wear a helmet and eye protection. Always wear a professionally installed 5 Point harness. Never use the vehicle in an unsafe or illegal manner.

The VW Store chassis are designed for pleasure riding. They are not designed for racing or jumping. 'The VW Store' does not encourage, promote or recommend racing, jumping, or any type of hard, fast, or trick riding. 'The VW Store' makes no claims to the safety of these chassis for any purpose.