Join our mailing list!







You are here: Home > Engine Parts > Oil System Components > Oil Coolers > Hardware
Sort By:
Page of 1
Oil Cooler Seals 8/10mm – Pack of 4
Our Price: $2.49

High quality replacement seals for use with stock oil cooler or with bypass adapter.
Oil Cooler Seals – 10mm – Late – Pack of 4
Our Price: $2.49

High quality replacement seals for use with stock oil cooler or with bypass adapter.
3/8” Male w/ 3/8” Hose Barb – Pack of 2
Our Price: $5.95

3/8” Male w/ 3/8” Hose Barb – Pack of 2
3/8” Male w/ 1/2” Hose Barb – Pack of 2
Our Price: $5.95

3/8” Male w/ 1/2” Hose Barb – Pack of 2
1/2” Male w/ 1/2” Hose Barb – Pack of 2
Our Price: $8.95

1/2” Male w/ 1/2” Hose Barb – Pack of 2
1/2” Male w/ 3/8” Hose Barb – Pack of 2
Our Price: $9.95

1/2” Male w/ 3/8” Hose Barb – Pack of 2
90* 3/8” Male x 3/8” Female – Pack of 2
Our Price: $10.95

90* 3/8” Male x 3/8” Female – Pack of 2
45* 3/8” Male x 3/8” Female – Pack of 2
Our Price: $10.95

45* 3/8” Male x 3/8” Female – Pack of 2
90* 1/2” Male x 1/2” Female – Pack of 2
Our Price: $11.49

90* 1/2” Male x 1/2” Female – Pack of 2
EMPI 9141 - DECK LID COOLER KIT / STAND OFF KIT - PAIR WITH HARDWARE
Our Price: $11.95

BOLTS BETWEEN YOUR DECK LID BRACKETS AND BODY TO LIFT AND HOLD TOP OF DECK LID AWAY FROM THE BODY.
ALLOWING IMPROVED COOLING!
MADE FROM CAST ALUMINUM!
FITS ALL T1 STD & SUPER BEETLES

** FREE SHIPPING VIA FIRST CLASS MAIL TO USA **
EMPI 9203 - Oil Cooler Bypass w/ Gasket & Hardware
Our Price: $12.95

Replaces stock oil cooler allowing for use of external oil cooler.  Eliminates air flow blockage to #3 & #4 cylinders.  Includes mounting hardware & gasket.
1/2” Female Swivel x 1/2” Hose Barb – Pack of 2
Our Price: $12.99

1/2” Female Swivel x 1/2” Hose Barb – Pack of 2
EMPI 9146 - Oil Cooler Block-Off w/ Gasket, Plug & Hardware
Our Price: $19.95

Blocks off oil passages for applications where “full-flow” oil system is used or when normal oil cooler is no longer needed.  Tapped boss for oil pressure sender.  Includes mounting hardware & gasket.
Universal Adapter w/ Nipple for Remote Filter
Our Price: $24.95

Can be used on a number of makes & modles, including T4 & VW Water-Cooled models.  Fitted w/ 3/4” x 16 Nipple & Tapped for 3/8NPT Fittings.
Inline Cooler Thermostat – 8AN 1/2” Hose Barb
Our Price: $36.95

Put your cooler fan on autopilot w/ these fan thermostats.  No worries about cooking your engine because there are no more switches to remember to turn on or off.  Attaches to the inlet port of the oil cooler or it can be spliced into existing 1/2” hose & it activates at 180* F.
EMPI 9247 - Universal Sandwich Adapter w/ Special Male/Female Nipple
Our Price: $36.95

Can be used on a number of makes & modles, including T4 & VW Water-Cooled models.  Fitted w/ 3/4” x 16 Nipple & Tapped for 3/8NPT Fittings.
Oil Thermostat Only w/ 3/8” NPT
Our Price: $59.95

Most in-line & bypasses oil cooler until oil warms up to approximately 175*.  Always partially open to avoid over pressurizing.  A must in performance & cold-weather applications.  Kit comes complete w/ fittings & clamps.
Oil Thermostat w/ Fittings & Clamps
Our Price: $64.95

Most in-line & bypasses oil cooler until oil warms up to approximately 175*.  Always partially open to avoid over pressurizing.  A must in performance & cold-weather applications.
EMPI 9252 - FULL FLOW REMOTE FILTER KIT - BOLT ON
Our Price: $84.95

EVERYTHING YOU NEED TO INSTALL A FULL FLOW REMOTE OIL FILTER SYSTEM. THIS BOLT-ON KIT REQUIRES NO MACHINING OR ENGINE REMOVAL. INCLUDES PUMP COVER, REMOTE FILTER BRACKET, OIL RETURN ADAPTER, FITTINGS, HOSE, AND HARDWARE. OIL PUMP MUST BE THREADED & PLUGGED TO COMPLETE FULL FLOW SYSTEM.
96 Plate Oil Cooler Kit
Our Price: $134.95

Complete kit includes : Oil Cooler, Bypass Adapter, Remote Filter Bracket, High-Temp. Hose & all fittings required for installation.  Fits all T1 & T2 thru 71